HOW TO USE A DIESEL LIGHT TOWER WITH ENERGY STORAGE BATTERY

LIGHT TOWER SET UP

1.Pull the locking pin on the outrigger and pull each outrigger out until the spring loaded locking pin snaps back into place.

2.Turn the jack handles clockwise to start leveling the trailer. Adjust all four jacks by turning their handles clockwise until they are firmly in contact with the ground.

3.Check and turn on the energy storage battery switch, starting battery switch, control cabinet switch, and generator set controller switch.

RAISING AND LOWER THE MAST

Toggle the button to the "UP" position and hold it to raise the mast to the desired height. Toggle the button to the "DOWN" position and hold it to low the mast to the desired height.

START AND SHUT DOWN THE GENERATOR SET

Use the direction keys on the controller interface to adjust the unit controller to automatic mode.

Press the start button to start the generator set and press the stop button to shut down the generator set.

LIGHT OPERATION

Toggle the switch to the "ON" position to turn on the light and adjust the brightness of the light by turning the Dimmer.Toggle the switch to the "OFF" position to turn off the light.

Turn the button to the "clockwise" position to turn the light clockwise, and turn the button to the "anti-clock" position to turn the light counterclockwise.

Turn the button to the "High angle" position to raise the angle of the lamp. Turn the button to the "Low angle" position to lower the angle of the lamp.